EZVIZ - Default Login Admin

EZVIZ Default IP

To access the admin page type 192.168.1.1 into your web browser's address bar or click on the link below.

Admin

Default logins for EZVIZ

100 %
IP Address:
192.168.1.1
Username:
admin
Password:
admin

EZVIZ Router Login

Need to change your WiFi password or update your network settings? Log into your EZVIZ router's setup page to get it done.

The default gateway address for EZVIZ is 192.168.1.1. Type this into your browser's address bar (not the search bar) while connected to the router's network.

Login Steps

Accessing your EZVIZ router admin through http://192.168.1.1 will allow you to change the settings and configurations that your router software provides.

  1. Connect to your EZVIZ router. Make sure the router is on. Plug in an ethernet cable or connect to the router's WiFi. Ethernet works best for admin access.

  2. Open any web browser. Type 192.168.1.1 into the address bar (not the search bar) and press Enter.

  3. If the default IP doesn't work, find the real one. On Windows, open Command Prompt and type ipconfig. Look for "Default Gateway". On Mac, open Terminal and type netstat -nr.

  4. Use the default credentials listed above. The most common combo is admin / admin. Check the label on the bottom of your router if those don't work.

  5. You're in. Change your WiFi name and password, set up port forwarding, update firmware, or adjust security settings.

Troubleshooting EZVIZ Router Login

If you have forgotten your username and password, you can follow the instructions to recover them. If you haven't changed the default username and password that came with the router, you can consult our default router usernames and passwords list.

  • Can't reach the login page

    Make sure you're connected to the EZVIZ router via WiFi or ethernet, not mobile data. Type http://192.168.1.1 in the address bar. If it still won't load, unplug the router for 30 seconds and try again.

  • Default credentials not accepted

    Check the sticker on the bottom of your EZVIZ router. The actual username and password are printed there. If those don't work either, someone changed them. You'll need to factory reset.

  • Router stops working after changes

    Reset to factory defaults: hold the reset button on the back of your EZVIZ router for 10-30 seconds. Wait 2-3 minutes for it to reboot, then log in again.

  • Forgot the admin password

    A factory reset is the only way back in. This wipes all settings, including your WiFi name and password. You'll need to set everything up again after the reset.

  • Settings won't save

    Use an ethernet cable instead of WiFi when making changes. Some EZVIZ routers drop the connection during saves, which causes errors.

About EZVIZ Routers

EZVIZ started as Hikvision's consumer security brand in 2013, focusing on smart home cameras and surveillance systems. The company expanded into networking equipment around 2018, creating routers designed specifically for homes with multiple security cameras and IoT devices. EZVIZ routers target users who want reliable connectivity for their smart home ecosystems, particularly those already using EZVIZ cameras and security products.

EZVIZ has built a strong presence in Asian markets, especially China, Southeast Asia, and India. The brand positions itself as a bridge between professional-grade security networking and consumer-friendly home routers. EZVIZ routers often include security-focused features like VPN support, guest network isolation, and bandwidth prioritization for security cameras.

Home users choose EZVIZ routers because they integrate seamlessly with EZVIZ security cameras and smart home devices. The brand offers competitive pricing while including enterprise-level security features that appeal to privacy-conscious users. EZVIZ routers typically provide better camera streaming performance than generic brands.

EZVIZ's mobile app management makes router setup easier for non-technical users. The company also provides local language support and customer service in many developing markets where other premium brands lack presence. Many users appreciate EZVIZ's focus on network security without requiring advanced technical knowledge.

Accessing the EZVIZ Admin Panel

EZVIZ routers use a web-based admin panel that you access through your browser. Connect your computer or phone to the EZVIZ router's WiFi network, then navigate to the admin page using the default IP address. You'll see the EZVIZ login screen with fields for username and password.

Most EZVIZ routers use 192.168.1.1 as the default IP address. You can also find this information on the router's bottom label, which shows the admin URL along with default login credentials. Some newer EZVIZ models display the admin address as 'ezrouter.net' instead of the numeric IP.

If 192.168.1.1 doesn't work, try 192.168.0.1 or check your computer's network settings. EZVIZ routers sometimes switch to 192.168.0.1 if another device on your network already uses 192.168.1.1. Open Command Prompt and type 'ipconfig' to see your gateway address, which is your EZVIZ router's IP.

EZVIZ routers often show a 'connection timeout' error if you're connected to the wrong network. Make sure you're connected to your EZVIZ router's WiFi, not your phone's mobile data or a neighbor's network. The EZVIZ admin page won't load if you're on a different network segment.

Some EZVIZ models redirect to a mobile-optimized login page that doesn't work well on computers. If you see a simplified login screen, try accessing the router from a smartphone or tablet instead. EZVIZ prioritizes mobile management, so the full admin interface works better on mobile devices.

Browser compatibility issues occur with older versions of Chrome or Firefox. EZVIZ admin panels work best with updated browsers. Clear your browser cache and cookies if the login page appears broken or won't accept your credentials.

Popular EZVIZ Models

The EZVIZ W3 router uses 'admin' for both username and password by default. This model targets smart home users and includes dedicated bandwidth controls for EZVIZ cameras. The W3's admin panel shows camera connection status and allows priority settings for security devices.

EZVIZ CS-W2S routers also use 'admin/admin' credentials but feature a simplified interface focused on basic networking. These budget models don't include advanced camera integration features. The CS-W2S line targets users who want reliable WiFi without smart home complexity.

Newer EZVIZ X3 models may have randomized default passwords printed on the router label. Check the bottom sticker for a unique password instead of trying 'admin/admin'. X3 routers include mesh networking capabilities and more sophisticated security settings than earlier EZVIZ models.

Older EZVIZ routers use the classic 'admin/admin' login across all models from 2018-2020. These routers show a basic web interface with standard networking options plus EZVIZ-specific camera settings. The admin panels look similar across the W-series and CS-series routers.

Newer EZVIZ models starting in 2021 use unique default passwords for security. The admin interface also changed to a more modern design with mobile-first layouts. Recent EZVIZ routers require the EZVIZ mobile app for initial setup, though web admin access remains available for advanced configuration.

Troubleshooting EZVIZ Login Issues

When you can't reach the EZVIZ admin page, first check that your device connects to the router's WiFi network. Look for an EZVIZ network name in your WiFi list and connect using the password from the router's label. Some EZVIZ routers broadcast hidden networks, so you might need to manually add the network name.

If you're connected but 192.168.1.1 won't load, try power cycling your EZVIZ router. Unplug the power cord for 30 seconds, then plug it back in. Wait 2-3 minutes for the EZVIZ router to fully boot before trying to access the admin page again. EZVIZ routers can take longer to start up than other brands.

EZVIZ routers from 2020 and earlier use 'admin' for both username and password. If this doesn't work, check the router's bottom label for printed credentials. Some EZVIZ models have a default password like 'password' or '12345678' instead of 'admin'.

Newer EZVIZ routers have unique passwords printed on the device label. Look for a QR code or text showing 'Default Login' information. If someone changed the password and you can't remember it, you'll need to factory reset the EZVIZ router to restore default credentials.

After factory resetting your EZVIZ router, wait for the power LED to stop blinking and stay solid. Connect to the default EZVIZ WiFi network, which usually appears as 'EZVIZ_' followed by numbers. Use the default password from the router label to join this network.

Open your browser and go to 192.168.1.1 to access the reset EZVIZ admin panel. You'll see the initial setup wizard that guides you through basic configuration. Follow the prompts to set up your internet connection and create a new admin password for your EZVIZ router.

How to Factory Reset a EZVIZ Router

Factory reset your EZVIZ router when you've forgotten the admin password or when the router stops working properly. Reset also helps if you bought a used EZVIZ router and need to clear the previous owner's settings.

Locate the reset button on your EZVIZ router, usually a small recessed button on the back or bottom panel. Make sure the router is powered on with all lights stable. Press and hold the reset button using a paperclip or pin for 10-15 seconds until the power LED starts blinking rapidly.

Keep holding the reset button until all LEDs turn off, then release it. Your EZVIZ router will restart automatically, which takes about 2-3 minutes. The power LED will blink during startup, then turn solid when the reset is complete.

Some EZVIZ models require a 30-second reset hold time instead of 10-15 seconds. If the first attempt doesn't work, try holding the reset button for a full 30 seconds. The router should restart with factory default settings restored.

After reset, your EZVIZ router returns to default settings including the original admin username and password. Reconnect your devices to the default EZVIZ WiFi network and log into the admin panel to reconfigure your internet settings and security preferences.

Related Router Brands

Router Guides & Articles

Router Guides

Network Tools

Helpful Resources

Looking for a new EZVIZ router? Find EZVIZ routers on Amazon ›