iiNet - Default Login Admin
To access the admin page type 192.168.0.1 into your web browser's address bar or click on the link below.
Credenciais padrão para iiNet
- IP Address:
- 192.168.0.1
- Username:
- admin
- Password:
- admin
iiNet Router Login
iiNet is Australia's second-largest DSL provider, now owned by TPG Telecom. They supply the iiNet Bob routers (Netcomm-manufactured) to broadband customers.
Login Details
iiNet Bob routers use 192.168.0.1. Username is admin and password is admin.
About iiNet Routers
iiNet started as an Australian internet service provider in 1993 and became one of the country's largest broadband companies. The company provided custom-branded routers to their customers, working with manufacturers like Billion, Netcomm, and TG-Link to create devices specifically configured for iiNet's network services. In 2015, TPG Telecom acquired iiNet, but many existing iiNet-branded routers remain in use across Australia and some international markets.
iiNet routers were designed to work seamlessly with the company's ADSL, NBN, and fiber services. These devices came pre-configured with iiNet's specific settings, making setup easier for customers who received them as part of their internet packages. While iiNet doesn't manufacture routers anymore under TPG ownership, thousands of households still use these legacy devices.
Home users chose iiNet routers because they came pre-configured and supported by iiNet's technical team. You didn't need to worry about complex setup procedures or compatibility issues since these devices were tested specifically with iiNet's network infrastructure. The routers offered reliable performance for typical home internet usage, including streaming, gaming, and multiple device connections.
Many users appreciated that iiNet provided direct technical support for these devices, unlike generic routers where you might get passed between your ISP and the router manufacturer. The web interface was also customized to show iiNet branding and simplified configuration options that matched the company's service offerings.
Accessing the iiNet Admin Panel
Accessing your iiNet router's admin panel lets you configure wifi settings, check connection status, and modify security options. You'll need to connect to the router's web interface using your browser, which works the same way whether you're using Windows, Mac, or mobile devices.
Most iiNet routers use 192.168.0.1 as their default IP address. You can verify this by checking the sticker on your router, which usually shows the default gateway address along with the model number. If you can't find the sticker or it's worn off, open Command Prompt on Windows and type 'ipconfig' to see your default gateway address.
Some older iiNet models might use 192.168.1.1 or 10.0.0.1 instead. Try these addresses if 192.168.0.1 doesn't work. The correct IP address should load a login page with iiNet branding or the manufacturer's interface that iiNet customized.
iiNet routers sometimes have cached login sessions that prevent new connections. Clear your browser cache and cookies, then try again with a fresh browser window. Some iiNet models are sensitive to browser choice and work better with Chrome or Firefox than Internet Explorer or Safari.
If you see a 'connection timeout' error, your iiNet router might be in bridge mode rather than router mode. Bridge mode disables the web interface because the device only passes traffic to another router. Check if you have a second router or modem connected to your iiNet device. You might need to access the other device's interface instead.
Certain iiNet firmware versions block admin access when the internet connection is down. If your internet isn't working, the router might redirect all traffic to an error page instead of showing the login screen. Try connecting an ethernet cable directly to test if this fixes the admin access issue.
Popular iiNet Models
The iiNet Bob router was one of the most common models, using 192.168.0.1 with admin/admin credentials. Bob routers had a distinctive blue interface with iiNet branding and simplified menu options. The iiNet Bob Lite used the same login details but had fewer advanced configuration options.
iiNet TG series routers, manufactured by TP-Link, typically used 192.168.0.1 with admin/admin or admin/password combinations. These models showed a white and blue interface with iiNet logos throughout the configuration pages. The TG models were popular for NBN connections and had specific settings for iiNet's network parameters.
Billion-manufactured iiNet routers often used admin/admin credentials but sometimes came with unique passwords printed on the device label. These models were common for ADSL services and had green-themed interfaces with iiNet customization. Some Billion models required 'admin' as the username and left the password field blank for initial access.
iiNet Bob routers have a simplified interface that hides advanced networking options behind an 'expert mode' toggle. You need to enable expert mode to access features like port forwarding, VPN settings, or detailed wireless configuration. TG series models show all options by default but organize them differently than standard TP-Link interfaces.
Older iiNet ADSL routers often require you to log out and back in when switching between basic and advanced configuration modes. Some models also have separate login credentials for user-level and administrator-level access, though most home users only need the admin account.
Troubleshooting iiNet Login Issues
If 192.168.0.1 doesn't load anything, check that your computer is connected to the iiNet router's network, either by ethernet cable or wifi. Windows users should verify their network adapter shows an IP address starting with 192.168.0 in the network settings. Mac users can check this in System Preferences under Network.
Some iiNet routers disable web access when they're updating firmware or have detected hardware problems. Look for unusual LED patterns on the device. Most iiNet models should have steady green or blue power lights when working normally. Flashing red or amber lights often indicate problems that prevent admin access.
iiNet routers typically use admin/admin as the default credentials, but some models came with unique passwords. Check the white sticker on your router for any printed password information. Some iiNet devices use 'admin' as the username with the wifi password as the admin password, which is unusual but occurs on certain models.
If you changed the admin password and forgot it, you'll need to factory reset the iiNet router. The device will return to its default admin/admin credentials after reset. Don't confuse the admin login with your iiNet account password or wifi network password, which are completely different authentication systems.
After factory resetting your iiNet router, it returns to the default 192.168.0.1 IP address and admin/admin login credentials. The device will also broadcast an unsecured wifi network with a name like 'iiNet' or the model name. Connect to this network first, then access the web interface to reconfigure your internet settings.
You'll need to re-enter your iiNet internet connection details, including any username and password provided by iiNet for your service. The router won't connect to the internet automatically after reset, even though it worked before.
How to Factory Reset a iiNet Router
Factory reset your iiNet router when you can't remember the admin password, the device isn't connecting to the internet despite correct settings, or when you're experiencing persistent wifi problems that basic troubleshooting can't fix. Reset is also necessary if you're giving the router to someone else or moving it to a different internet connection.
Locate the small reset button on your iiNet router, usually found on the back or bottom of the device near the power connector. The button is typically recessed and requires a paperclip or small tool to press. Make sure the router is powered on and all lights have finished their startup sequence.
Press and hold the reset button for 10-15 seconds while the router is running. You'll see the lights on the iiNet router start flashing or change colors during the reset process. Keep holding the button until all lights turn off, then release it. The router will restart automatically and take about 2-3 minutes to complete the factory reset process.
Don't unplug the power during reset or you might damage the firmware. Wait for the iiNet router to finish restarting completely before trying to access the admin interface. The power light should return to solid green or blue when the reset is finished.
Once your iiNet router completes the factory reset, connect to its default wifi network or use an ethernet cable to access 192.168.0.1 in your browser. Log in with admin/admin and follow the setup wizard to configure your internet connection, wifi network name, and security settings. You'll need to re-enter all your custom configurations since reset erases everything except the default firmware.
Marcas de roteadores relacionadas
Router Guides & Articles
- How to Reset Your Router to Factory Settings
- Troubleshooting WiFi Connection Problems
- How to Find Your Router's Default IP Address
- How to Set Up Port Forwarding
Router Guides
- Wi-Fi Settings Guide — Configure your wireless network name and password
- Router Security Guide — Protect your network from unauthorized access
- Troubleshooting Guide — Fix common router and connection problems
Network Tools
Helpful Resources
- Default Router Password List — Search all default credentials by brand
- Default IP Address List — Browse all router gateway addresses
- Network Tools — Check your IP, test ports, generate WiFi QR codes, and more
- All Router Brands — View login guides for every router manufacturer
Looking for a new iiNet router? Find iiNet routers on Amazon ›