Reyee - Default Login Admin

Reyee Default IP

To access the admin page type 192.168.110.1 into your web browser's address bar or click on the link below.

Administration

Identifiants par défaut pour Reyee

100 %
IP Address:
192.168.110.1
Username:
admin
Password:
admin

Reyee Router Login

Need to change your WiFi password or update your network settings? Log into your Reyee router's setup page to get it done.

The default gateway address for Reyee is 192.168.110.1. Type this into your browser's address bar (not the search bar) while connected to the router's network.

Étapes de connexion

Accessing your Reyee router admin through http://192.168.110.1 will allow you to change the settings and configurations that your router software provides.

  1. Connect to your Reyee router. Make sure the router is on. Plug in an ethernet cable or connect to the router's WiFi. Ethernet works best for admin access.

  2. Open any web browser. Type 192.168.110.1 into the address bar (not the search bar) and press Enter.

  3. If the default IP doesn't work, find the real one. On Windows, open Command Prompt and type ipconfig. Look for "Default Gateway". On Mac, open Terminal and type netstat -nr.

  4. Use the default credentials listed above. The most common combo is admin / admin. Check the label on the bottom of your router if those don't work.

  5. You're in. Change your WiFi name and password, set up port forwarding, update firmware, or adjust security settings.

Dépannage Reyee Router Login

If you have forgotten your username and password, you can follow the instructions to recover them. If you haven't changed the default username and password that came with the router, you can consult our default router usernames and passwords list.

  • Can't reach the login page

    Make sure you're connected to the Reyee router via WiFi or ethernet, not mobile data. Type http://192.168.110.1 in the address bar. If it still won't load, unplug the router for 30 seconds and try again.

  • Default credentials not accepted

    Check the sticker on the bottom of your Reyee router. The actual username and password are printed there. If those don't work either, someone changed them. You'll need to factory reset.

  • Router stops working after changes

    Reset to factory defaults: hold the reset button on the back of your Reyee router for 10-30 seconds. Wait 2-3 minutes for it to reboot, then log in again.

  • Forgot the admin password

    A factory reset is the only way back in. This wipes all settings, including your WiFi name and password. You'll need to set everything up again after the reset.

  • Settings won't save

    Use an ethernet cable instead of WiFi when making changes. Some Reyee routers drop the connection during saves, which causes errors.

About Reyee Routers

Reyee is a relatively new networking brand launched by Ruijie Networks, a major Chinese networking equipment company with over 20 years of experience. Ruijie introduced the Reyee brand specifically to target home users and small businesses with affordable, easy-to-manage routers. The brand entered the market around 2019 and has quickly gained traction in emerging markets across Asia and Latin America.

Reyee positions itself as a budget-friendly alternative to more expensive router brands while still offering modern features like Wi-Fi 6, mesh networking, and cloud management. The company focuses on providing enterprise-grade technology in consumer-friendly packages, drawing from Ruijie's extensive background in corporate networking solutions.

Home users choose Reyee routers primarily for their excellent price-to-performance ratio and surprisingly robust feature sets. Many Reyee models offer Wi-Fi 6 capabilities at prices significantly lower than competing brands. The routers also come with a user-friendly mobile app called Ruijie Cloud that makes initial setup much easier than traditional web interfaces.

Reyee has gained particular popularity in the Philippines, India, and other developing markets where users want modern router features without premium pricing. The brand's focus on easy management through mobile apps appeals to users who find traditional router administration intimidating.

Accessing the Reyee Admin Panel

Accessing your Reyee router's admin panel requires connecting to the web interface through your browser. Unlike some router brands that use common addresses like 192.168.1.1, Reyee uses 192.168.110.1 as the default gateway address. You'll need to be connected to your Reyee router's network either through Wi-Fi or an Ethernet cable to reach the login page.

Most Reyee routers use 192.168.110.1 as their default IP address, which is different from many other router brands. You can find this address printed on a sticker attached to the bottom or back of your Reyee router, along with the default login credentials. If the sticker is missing or unreadable, open Command Prompt on Windows and type 'ipconfig' to find your default gateway address.

Some newer Reyee models also respond to the web address 'reyeewifi.com' when you're connected to the router's network. You can try typing this directly into your browser's address bar as an alternative to the IP address.

Reyee routers sometimes have issues with browser compatibility, particularly with older versions of Internet Explorer or Safari. If you can't reach the login page, try using Google Chrome or Firefox instead. Make sure you're typing 'http://192.168.110.1' and not 'https://' since Reyee routers don't use secure connections for initial access.

Another common Reyee-specific issue occurs when the router is in 'Router Mode' versus 'Access Point Mode'. If you can't connect to 192.168.110.1, check if your Reyee router's mode switch is set correctly. In Access Point mode, the router might adopt a different IP address from your main router. You can also try connecting directly to the Reyee router with an Ethernet cable to avoid any Wi-Fi connectivity issues.

Popular Reyee Models

The Reyee RG-EW1200G Pro is one of their most popular Wi-Fi 6 models, using the standard 192.168.110.1 address with 'admin/admin' credentials. The RG-EW3200GX Pro offers tri-band Wi-Fi 6 and maintains the same default settings. For budget users, the RG-EW1800GX provides good performance with identical login credentials. The enterprise-oriented RG-EW1900G series also uses these same defaults but includes additional management features.

Reyee's mesh router systems like the RG-EW3000GX use the same 192.168.110.1 address for the main router unit. However, satellite units in the mesh network don't have separate login pages since they're managed through the main router's interface. All Reyee models ship with 'admin' as both the username and password, making initial access straightforward.

Most Reyee router models use identical default login credentials and IP addresses, but the web interface varies between basic and advanced models. Entry-level Reyee routers have simplified admin panels with fewer configuration options, while business-oriented models include advanced features like VLAN management and bandwidth controls.

The main difference you'll notice is that newer Reyee models automatically redirect you to the mobile app setup during first-time access. Older models go straight to the web interface without this redirection step.

Troubleshooting Reyee Login Issues

If you can't reach your Reyee router at 192.168.110.1, first check that you're connected to the correct network. Look for a network name starting with 'Reyee_' followed by numbers or letters, which is the default naming pattern for Reyee routers. If you see multiple Reyee networks, you might be connecting to a neighbor's router instead of your own.

Try power cycling your Reyee router by unplugging it for 30 seconds, then plugging it back in. Wait about 2 minutes for the router to fully boot up before attempting to connect again. You can also try connecting with an Ethernet cable directly to one of the LAN ports on the back of your Reyee router to bypass any Wi-Fi issues.

Reyee routers ship with 'admin' as both the default username and password. If these credentials don't work, someone may have changed them during initial setup. Check the sticker on your Reyee router again to make sure you're using the correct defaults. Some users mistake the Wi-Fi password printed on the sticker for the admin login password.

If you're certain the password was changed and you can't remember it, you'll need to perform a factory reset on your Reyee router. Don't try common password variations as Reyee routers may temporarily lock you out after several failed login attempts, requiring a 10-minute wait before you can try again.

After factory resetting your Reyee router, wait for the LED lights to stop blinking and show a solid blue or green color before attempting to log in. Connect to the default 'Reyee_' network that appears, then navigate to 192.168.110.1 in your browser. You'll be able to log in using 'admin/admin' and should immediately change these default credentials for security.

How to Factory Reset a Reyee Router

Factory reset your Reyee router when you've forgotten the admin password, the router isn't responding properly, or you're experiencing persistent connectivity issues that basic troubleshooting can't resolve. Reset is also recommended when buying a used Reyee router to clear any previous configuration.

Locate the small reset button on the back or bottom of your Reyee router, usually near the power port. With the router powered on, press and hold the reset button using a paperclip or similar tool for about 10 seconds. The LED lights will start flashing rapidly, indicating the reset process has begun.

Keep holding the reset button until you see all lights turn off, then release it. Your Reyee router will automatically restart and return to factory defaults. Don't unplug the power during this process as it could damage the router's firmware. The entire reset and reboot process takes about 2-3 minutes to complete.

Once the reset finishes, you'll see the default 'Reyee_' network name broadcasting again. The router will be back to its original 192.168.110.1 IP address with 'admin/admin' login credentials.

After resetting your Reyee router, you'll need to set up your Wi-Fi network name and password again. Connect to the default network, log in at 192.168.110.1 with 'admin/admin', and follow the setup wizard. Reyee routers often prompt you to download their mobile app during this process for easier ongoing management.

Router Guides & Articles

Router Guides

Network Tools

Helpful Resources

Looking for a new Reyee router? Find Reyee routers on Amazon ›