RAVPower - Default Login Admin

RAVPower Default IP

To access the admin page type 10.10.10.254 into your web browser's address bar or click on the link below.

الإدارة

بيانات تسجيل الدخول الافتراضية لـ RAVPower

100 %
IP Address:
10.10.10.254
Username:
admin
Password:
admin

RAVPower Router Login

Need to change your WiFi password or update your network settings? Log into your RAVPower router's setup page to get it done.

The default gateway address for RAVPower is 10.10.10.254. Type this into your browser's address bar (not the search bar) while connected to the router's network.

خطوات تسجيل الدخول

Accessing your RAVPower router admin through http://10.10.10.254 will allow you to change the settings and configurations that your router software provides.

  1. Connect to your RAVPower router. Make sure the router is on. Plug in an ethernet cable or connect to the router's WiFi. Ethernet works best for admin access.

  2. Open any web browser. Type 10.10.10.254 into the address bar (not the search bar) and press Enter.

  3. If the default IP doesn't work, find the real one. On Windows, open Command Prompt and type ipconfig. Look for "Default Gateway". On Mac, open Terminal and type netstat -nr.

  4. Use the default credentials listed above. The most common combo is admin / admin. Check the label on the bottom of your router if those don't work.

  5. You're in. Change your WiFi name and password, set up port forwarding, update firmware, or adjust security settings.

استكشاف الأخطاء وإصلاحها RAVPower Router Login

If you have forgotten your username and password, you can follow the instructions to recover them. If you haven't changed the default username and password that came with the router, you can consult our default router usernames and passwords list.

  • Can't reach the login page

    Make sure you're connected to the RAVPower router via WiFi or ethernet, not mobile data. Type http://10.10.10.254 in the address bar. If it still won't load, unplug the router for 30 seconds and try again.

  • Default credentials not accepted

    Check the sticker on the bottom of your RAVPower router. The actual username and password are printed there. If those don't work either, someone changed them. You'll need to factory reset.

  • Router stops working after changes

    Reset to factory defaults: hold the reset button on the back of your RAVPower router for 10-30 seconds. Wait 2-3 minutes for it to reboot, then log in again.

  • Forgot the admin password

    A factory reset is the only way back in. This wipes all settings, including your WiFi name and password. You'll need to set everything up again after the reset.

  • Settings won't save

    Use an ethernet cable instead of WiFi when making changes. Some RAVPower routers drop the connection during saves, which causes errors.

About RAVPower Routers

RAVPower started as a mobile charging company in 2011 before expanding into wireless networking gear. The brand built its reputation making portable batteries and wireless chargers for smartphones. They entered the router market by focusing on travel routers and portable WiFi devices that work well with their existing power products.

RAVPower targets users who need reliable internet while traveling or working remotely. Their routers often double as power banks or charging stations. The company markets primarily through Amazon and direct sales rather than big box stores. Many RAVPower devices support multiple operating modes including router, access point, and range extender functions.

Home users choose RAVPower because their routers cost less than premium brands while offering good performance. The brand appeals to people who already own RAVPower charging products and want matching network gear. Their travel routers work great for creating WiFi hotspots in hotels or sharing mobile data connections.

RAVPower routers come with simple setup processes that don't require technical knowledge. The web interface uses plain language instead of networking jargon. Most models include USB ports for charging devices while providing internet access.

Accessing the RAVPower Admin Panel

You access your RAVPower router admin panel through a web browser using the IP address 10.10.10.254. Connect your computer or phone to the RAVPower WiFi network first. Open any web browser and type 10.10.10.254 in the address bar. The RAVPower login page will appear asking for your username and password.

RAVPower uses 10.10.10.254 as the default IP address for all their router models. You'll see this address printed on the device label along with the default WiFi password. If 10.10.10.254 doesn't work, check if someone changed the router to access point mode. In AP mode, the router gets an IP address from your main network instead of using its own.

Open Command Prompt on Windows or Terminal on Mac and type 'ipconfig' or 'ifconfig' to find the gateway address. The gateway IP is what you'll use to access RAVPower when it's in access point mode.

RAVPower routers sometimes get confused between router mode and access point mode during setup. If you can't reach 10.10.10.254, hold the mode button for 3 seconds to switch between modes. The LED will change color to show which mode is active.

Browser cache problems happen often with RAVPower devices. Clear your browser cache and cookies before trying to log in. Some users need to disable browser security extensions that block local network access. Try using a different browser if the login page won't load.

RAVPower routers reset their IP address if you power cycle them while changing modes. Wait 60 seconds after plugging in the device before trying to connect. The WiFi network name will appear in your available networks list when the router is ready.

Popular RAVPower Models

The RAVPower FileHub AC750 uses admin/admin as the default login credentials. This model works as a wireless router, NAS device, and power bank all in one unit. The RP-WD009 model also uses admin/admin and includes a built-in battery for portable use. You can find these credentials on the device label under the battery compartment.

RAVPower's AC1200 travel router (model RP-WD06) comes with admin/admin as well. The newer WiFi 6 models like the RP-WD16 keep the same login pattern. Some older RAVPower models from 2019 and earlier might use admin/password instead of admin/admin.

The RAVPower Turbo series routers use the standard 10.10.10.254 IP address but require you to set a custom password during first-time setup. These models won't accept the default admin/admin login after initial configuration.

RAVPower travel routers and home routers use the same login interface but different default modes. Travel models like the FileHub start in access point mode to connect to hotel WiFi. Home models start in router mode to create their own network. The mode affects which IP address you use to access the admin panel.

Newer RAVPower models have a mobile app for initial setup, but you still need the web interface for advanced settings. The app can't change all the same settings available through 10.10.10.254 in your browser.

Troubleshooting RAVPower Login Issues

Check that you're connected to the RAVPower WiFi network before trying to access 10.10.10.254. The default network name usually starts with 'RAVPower' followed by numbers. If you can't see the WiFi network, the router might be in access point mode instead of router mode.

Try connecting an ethernet cable directly from your computer to the RAVPower device. This bypasses WiFi connection issues and lets you reach the admin panel. Make sure your computer's WiFi is turned off when using ethernet to avoid IP conflicts.

RAVPower routers ship with admin/admin as the default username and password. Type these exactly in lowercase letters. If admin/admin doesn't work, someone already changed the password or you have an older model that uses admin/password instead.

The password reset button on RAVPower devices is usually inside the ethernet port area or next to the power button. Press and hold this button with a paperclip for 10 seconds while the device is powered on. The router will restart with factory default settings and admin/admin credentials.

After factory resetting your RAVPower router, wait 60 seconds for it to fully boot up. Connect to the default WiFi network that appears in your available connections. The network name will be something like 'RAVPower_XXXX' where XXXX represents the last four digits of the device serial number.

Open your browser and go to 10.10.10.254 to access the setup wizard. RAVPower will walk you through choosing your internet connection type and setting up WiFi security. You can change the admin password during this setup process.

How to Factory Reset a RAVPower Router

Factory reset your RAVPower router when you forget the admin password or the device stops working properly after configuration changes. Reset also helps when the router won't switch between modes or keeps dropping connections after firmware updates.

Find the reset button on your RAVPower device. It's usually a small recessed button near the power port or ethernet jacks. Keep the router plugged in and powered on during the reset process. Press and hold the reset button with a paperclip or similar tool for 10-15 seconds until the LED lights start flashing.

Release the reset button and wait for the RAVPower router to restart completely. The LED will stop flashing and show solid colors when the reset finishes. Don't unplug the device during this process or you might damage the firmware.

Some RAVPower models require you to hold the reset button while powering on the device. Check your specific model's manual since the reset procedure varies slightly between FileHub, travel, and home router versions.

Your RAVPower router returns to factory settings after reset. The admin login becomes admin/admin again and the WiFi network uses the default name and password printed on the device label. Connect to this default network and visit 10.10.10.254 to start the setup wizard again.

ماركات الراوتر ذات الصلة

Router Guides & Articles

Router Guides

Network Tools

Helpful Resources

Looking for a new RAVPower router? Find RAVPower routers on Amazon ›