192.168.20.1 - Login Admin

Étapes de connexion

Accessing your router admin through 192.168.20.1 address will allow you to change the settings and configurations that your router software provides.

1. Connectez votre appareil au routeur

   Connectez votre ordinateur ou téléphone au routeur par WiFi ou câble Ethernet. Le câble Ethernet est plus fiable pour accéder au panneau d'administration.

2. Ouvrez votre navigateur

   Ouvrez n'importe quel navigateur. Tapez l'adresse IP dans la barre d'adresse (pas dans la barre de recherche) et appuyez sur Entrée. Enter 192.168.20.1 into the address bar.

3. Saisissez vos identifiants

   Entrez le nom d'utilisateur et le mot de passe par défaut. S'ils ne fonctionnent pas, vérifiez l'étiquette sous votre routeur.

Dépannage 192.168.20.1

If you have forgotten your username and password, you can follow the instructions to recover them. If you haven't changed the default username and password that came with the router, you can consult our default router usernames and passwords list.

• Connexion

  Assurez-vous d'être sur le réseau du routeur (pas sur les données mobiles). Vérifiez que tous les voyants sont allumés.

• Redémarrer

  Débranchez le routeur pendant 30 secondes, puis rebranchez-le. Attendez 2 minutes avant de réessayer.

• Pare-feu

  Désactivez temporairement votre pare-feu ou logiciel de sécurité, car il peut bloquer l'accès aux pages d'administration locales.

• Vérifiez l'adresse

  Tapez l'IP dans la barre d'adresse, pas dans la barre de recherche. Assurez-vous qu'elle commence par http:// et utilise des chiffres, pas des lettres. The address is 192.168.20.1.

Configure Your Router at 192.168.20.1

Once you've logged into your router using 192.168.20.1, you can change settings to improve your internet experience. The admin panel gives you control over your WiFi network, security settings, and device access. Most people who access 192.168.20.1 want to change their WiFi password or network name first.

Change Your Router Password

Look for a section called 'Administration' or 'System' in your 192.168.20.1 admin panel. You'll find the router password settings here. Don't confuse this with your WiFi password - this password protects access to 192.168.20.1 itself. Type your current password, then enter a new one twice to confirm. Choose something you'll remember but others can't guess easily.

Save the changes and write down your new password. If you forget it, you'll need to reset your router completely. The 192.168.20.1 login will immediately require your new password, so don't close the browser until you're sure it works.

Change Your WiFi Name and Password

Find the 'Wireless' or 'WiFi' section in your 192.168.20.1 settings. You'll see fields for network name (SSID) and password (passphrase). The network name is what appears when people search for WiFi networks. Change it from the default to something personal but don't use your real name or address.

Set a strong WiFi password with at least 12 characters. Mix letters, numbers, and symbols. Avoid common words or personal information. After you save these changes through 192.168.20.1, your devices will disconnect. You'll need to reconnect each device using the new password you just created.

Port Forwarding

Port forwarding through 192.168.20.1 lets specific internet traffic reach devices on your network. You might need this for gaming consoles, security cameras, or running a home server. Look for 'Port Forwarding' or 'Virtual Server' in your router's 192.168.20.1 interface.

You'll need to know which device needs the forwarded ports and which port numbers to open. Enter the device's local IP address and the port numbers. Be careful here - opening wrong ports can create security risks. Only forward ports you actually need, and close them when you're done using the application that required them.

Parental Controls

Warning: Undefined array key "parental_controls" in /var/task/user/pages/ip-detail.php on line 277

Fatal error: Uncaught TypeError: renderContentBlock(): Argument #1 ($text) must be of type string, null given, called in /var/task/user/pages/ip-detail.php on line 277 and defined in /var/task/user/includes/helpers.php:2 Stack trace: #0 /var/task/user/pages/ip-detail.php(277): renderContentBlock(NULL) #1 /var/task/user/index.php(279): require('/var/task/user/...') #2 {main} thrown in /var/task/user/includes/helpers.php on line 2