Genexis - Default Login Admin

Genexis Default IP

To access the admin page type 192.168.100.1 into your web browser's address bar or click on the link below.

Administrar

Credenciales predeterminadas para Genexis

100 %
IP Address:
192.168.100.1
Username:
admin
Password:
admin

Genexis Router Login

Need to change your WiFi password or update your network settings? Log into your Genexis router's setup page to get it done.

The default gateway address for Genexis is 192.168.100.1. Type this into your browser's address bar (not the search bar) while connected to the router's network.

Pasos para iniciar sesión

Accessing your Genexis router admin through http://192.168.100.1 will allow you to change the settings and configurations that your router software provides.

  1. Connect to your Genexis router. Make sure the router is on. Plug in an ethernet cable or connect to the router's WiFi. Ethernet works best for admin access.

  2. Open any web browser. Type 192.168.100.1 into the address bar (not the search bar) and press Enter.

  3. If the default IP doesn't work, find the real one. On Windows, open Command Prompt and type ipconfig. Look for "Default Gateway". On Mac, open Terminal and type netstat -nr.

  4. Use the default credentials listed above. The most common combo is admin / admin. Check the label on the bottom of your router if those don't work.

  5. You're in. Change your WiFi name and password, set up port forwarding, update firmware, or adjust security settings.

Solución de problemas Genexis Router Login

If you have forgotten your username and password, you can follow the instructions to recover them. If you haven't changed the default username and password that came with the router, you can consult our default router usernames and passwords list.

  • Can't reach the login page

    Make sure you're connected to the Genexis router via WiFi or ethernet, not mobile data. Type http://192.168.100.1 in the address bar. If it still won't load, unplug the router for 30 seconds and try again.

  • Default credentials not accepted

    Check the sticker on the bottom of your Genexis router. The actual username and password are printed there. If those don't work either, someone changed them. You'll need to factory reset.

  • Router stops working after changes

    Reset to factory defaults: hold the reset button on the back of your Genexis router for 10-30 seconds. Wait 2-3 minutes for it to reboot, then log in again.

  • Forgot the admin password

    A factory reset is the only way back in. This wipes all settings, including your WiFi name and password. You'll need to set everything up again after the reset.

  • Settings won't save

    Use an ethernet cable instead of WiFi when making changes. Some Genexis routers drop the connection during saves, which causes errors.

About Genexis Routers

Genexis started as a Dutch telecommunications equipment company in the late 1990s. The company focused on building fiber optic network solutions for internet service providers across Europe and Asia. Genexis routers became popular when telecom companies needed reliable equipment for their fiber-to-the-home installations.

Genexis expanded into consumer markets when ISPs began offering their routers as part of internet packages. The company's routers are now common in the Philippines, where several major ISPs use Genexis equipment for their fiber internet services. You'll often find Genexis routers provided by PLDT, Globe, and other local internet providers.

Home users get Genexis routers because their ISP provides them, not because they choose the brand directly. These routers work well with fiber internet connections and offer stable performance for basic home networking needs. ISPs like Genexis because the equipment integrates easily with their network infrastructure.

Genexis routers are designed to work out of the box with minimal setup required. The web interface is straightforward, making it easier for non-technical users to manage their internet connection when needed.

Accessing the Genexis Admin Panel

You can access your Genexis router admin panel through any web browser on a device connected to your network. Open your browser and type the router's IP address in the address bar to reach the login page.

Most Genexis routers use 192.168.100.1 as their default IP address. You can find this printed on a sticker on the back or bottom of your router. Look for text that says "Default Gateway" or "Router IP" near the serial number.

If 192.168.100.1 doesn't work, check your computer's network settings. Open Command Prompt and type "ipconfig" to see your default gateway address. That's your Genexis router's IP address.

Genexis routers sometimes take longer than usual to load the login page. Wait 30-60 seconds after typing the IP address before refreshing the page. The router might be processing network requests from other devices.

Some Genexis models redirect you to a different URL after login. Don't worry if the address changes to something like "192.168.100.1/main.html" after entering your credentials. Your ISP might have customized the interface, which can change how pages load.

If you see a blank white page instead of the login form, clear your browser cache and cookies. Genexis routers can conflict with stored browser data from previous login sessions.

Popular Genexis Models

The Genexis Platinum series includes models like the P2541H and P2741H, which are common in Philippine ISP installations. These models typically use "admin" for both username and password. You'll find the login details on a white sticker attached to the router case.

Genexis FiberTwist models like the FT2200 series often come with ISP-specific firmware. Some use "admin" and "admin" while others might use "user" and "user" as default credentials. Check the label on your router for the exact login information.

Older Genexis DRG series routers, including the DRG717VGN, usually stick to "admin" and "admin" for default access. These models have a simpler web interface compared to newer Genexis equipment.

Newer Genexis models show a more modern login page with your ISP's branding and colors. Older models display a basic white login form with just username and password fields. The functionality remains the same regardless of appearance.

Some Genexis routers provided by ISPs have limited admin access. You might only see basic WiFi settings instead of advanced network configuration options. Your ISP controls which features are available to end users.

Troubleshooting Genexis Login Issues

Check that your device is connected to the Genexis router's network, either through WiFi or ethernet cable. The router's power LED should be solid green or blue. If it's blinking or red, wait a few minutes for the router to fully start up.

Try accessing 192.168.100.1 from a different device or browser. Sometimes Genexis routers block access from devices that have made too many failed login attempts. Switch to your phone's browser or use a different computer to test the connection.

Genexis routers often use "admin" for both username and password by default. Type "admin" in lowercase letters for both fields. Some ISPs change these defaults, so check the sticker on your router for the correct credentials.

If your ISP changed the default password, contact their technical support for the current login details. Many ISPs in the Philippines set custom passwords for security reasons and don't share them with customers unless requested.

After factory resetting your Genexis router, wait 2-3 minutes before trying to log in. The router needs time to restore default settings and restart all services. The power LED should be steady green when ready.

Use "admin" and "admin" to log in after reset, even if your ISP had different credentials before. Factory reset removes all custom settings and returns the router to manufacturer defaults.

How to Factory Reset a Genexis Router

Reset your Genexis router when you can't remember the admin password or when the device stops responding to network requests. Factory reset also helps if your ISP's technician changed settings that are causing connection problems.

Find the small reset button on the back of your Genexis router. You'll need a paperclip or similar thin object to press it. Keep the router plugged in and powered on during the reset process.

Press and hold the reset button for 10-15 seconds while the router is running. You'll see the lights on the front panel flash or turn off completely. Keep holding until the lights start blinking in sequence, then release the button.

Wait 3-5 minutes for your Genexis router to complete the reset process. The power LED will turn solid green when finished. Don't unplug the router during this time or you might cause permanent damage to the firmware.

Connect to your Genexis router using an ethernet cable for the first login after reset. Use 192.168.100.1 and "admin" / "admin" to access the admin panel. You'll need to reconfigure your WiFi network name and password before wireless devices can connect.

Marcas de routers relacionadas

Router Guides & Articles

Router Guides

Network Tools

Helpful Resources

Looking for a new Genexis router? Find Genexis routers on Amazon ›